Product Overview
PVI Industries 111791 Ignitor Gasket
The PVI Industries 111791 Ignitor Gasket is a replacement sealing component for the ignitor assembly on compatible PVI commercial water-heating equipment. Made from 1/8-inch Craneglas Type 232 material, the gasket fits around the ignitor opening and mounting points to help maintain the seal between mating components. Confirm part number 111791 against the unit’s parts documentation before ordering.
Part Details:
- PVI Industries replacement ignitor gasket, manufacturer part number 111791
- Identified by PVI as an igniter and washer gasket
- Made from 1/8-inch Craneglas Type 232 gasket material
- Approximately 2.655 inches wide by 1.300 inches high
- Features a 0.960-inch-wide central opening and two 0.313-inch mounting holes
- Intended for compatible PVI ignitor assemblies; equipment-model fit must be verified separately
Documentation:
FAQs:
Q: What is the PVI Industries 111791 Ignitor Gasket used for?
A: The PVI 111791 is a gasket for an ignitor assembly on compatible PVI commercial water-heating equipment. It fits around the ignitor opening and mounting points to provide a sealing layer between the assembly’s mating surfaces.
Q: What are the dimensions of the PVI 111791 ignitor gasket?
A: The gasket measures approximately 2.655 inches wide by 1.300 inches high. It has a 0.960-inch-wide central opening, two 0.313-inch-diameter mounting holes, and approximately 1.695 inches between the mounting-hole centers.
Q: What material is the PVI 111791 ignitor gasket made from?
A: PVI specifies 1/8-inch Craneglas Type 232 gasket material for part 111791. Confirm both the part number and gasket configuration when comparing it with the part removed from the equipment.
Q: Is PVI part 111791 an OEM replacement gasket, and does it replace an older part number?
A: PVI 111791 is sold as an OEM replacement ignitor gasket.
Q: How can I confirm that PVI 111791 is the correct ignitor gasket for my equipment?
A: Confirm PVI part number 111791 against the equipment’s parts documentation and check the unit model and serial number before ordering. The manufacturer drawing identifies 111791 as an Igniter & Washer Gasket made from 1/8-inch Craneglas Type 232, with an overall size of approximately 2.655 inches wide by 1.300 inches high, so these details can also help distinguish it from similar PVI gaskets.
