Product Overview
Condair 303 Steam Cylinder (151-9023)
The Condair 303 Steam Cylinder, part number 1519023, is an OEM replacement cylinder for compatible Condair and Nortec electrode steam humidifiers. It holds the water and electrodes used to generate steam while retaining waterborne mineral deposits during operation. Condair lists this cylinder for select EL, NHEL, MES, NHTC, NHPC, and NHMC humidifiers in 15–20 lb/hr, 208–277 V, three-phase configurations.
Part Details:
- OEM Condair 303 replacement steam cylinder
- Manufacturer part number 1519023
- Designed for compatible Condair and Nortec electrode steam humidifiers
- Manufacturer-listed for select EL, NHEL, MES, NHTC, NHPC, and NHMC series units
- Supports applicable 15–20 lb/hr, 208–277 V, three-phase configurations
- Includes the 303 cylinder and an O-ring
Documentation:
FAQs:
Q: Which Condair and Nortec humidifiers use the 1519023 Cylinder 303?
A: The Condair 1519023 Cylinder 303 is listed for select EL, NHEL, MES, NHTC, NHPC, and NHMC electrode steam humidifiers. Condair specifies applicable models in the 15–20 lb/hr range with 208–277 V, three-phase power, so verify the humidifier’s complete model, capacity, voltage, and phase before ordering.
Q: What are the capacity and electrical specifications for the Condair 303 Cylinder?
A: Condair associates the 303 cylinder with applicable 15–20 lb/hr humidifier models operating on 208–277 V, three-phase power. Because the required cylinder can vary by equipment configuration, compare these specifications with the humidifier nameplate and manufacturer parts information.
Q: How do I confirm that part number 1519023 is the correct replacement cylinder?
A: Confirm that the existing cylinder or equipment documentation identifies part number 1519023 or Cylinder 303. Then match the humidifier’s full model, output capacity, voltage, and phase because similar Condair cylinders are intended for different electrical and capacity configurations.
Q: When should a Condair 303 steam cylinder be replaced?
A: Replace the Condair 303 cylinder when the humidifier indicates that the cylinder has reached the end of its usable service life or when replacement is called for during maintenance. Minerals remain in the cylinder as steam is produced, so service life can vary with water conditions and system operation.
Q: Can an aftermarket cylinder replace the OEM Condair 1519023 Cylinder 303?
A: Condair instructs owners to use authentic Condair cylinders rather than third-party cylinders in its humidifiers. The manufacturer states that non-Condair cylinders may not interface correctly with the equipment and may affect the humidifier’s warranty, listing, functionality, and manufacturer liability.
